Hammerhead / TrailMaster Front Wheel Hub with Studs
Version 85
This front wheel hub is used on several makes and models of Chinese go-karts including American Sportworks, Carter, Hammerhead and TrailMaster. The best way to insure you are ordering the correct part is to use our detail pictures and measurements. Please be sure to check both before ordering.
Hub details:
- Black
- Width: 68.4mm (2.69 in)
- (4) 10mm*1.25 studs included and installed
- Studs are 78mm (3.07 in) apart center-to-center, side to side
- Studs are 110mm (4.33 in) apart center-to-center across
- 6202 and 6204 included and installed
- The 6202 bearing is on the side with the studs
- The OD of the 6202 is 35mm (1.38 in) ID is 15mm (0.59 in)
- The 6204 bearing is on the side with the six bolt holes
- The OD of the 6204 is 47mm (1.85 in) ID is 20mm (0.78 in)
- 25*47*7 seal
- (6) 6mm*1.00 threaded bolt holes
- Threaded holes are 29mm (1.14 in) center-to-center
- Used with front wheels with 4/110 bolt pattern
- Does not come with wheel nuts
- 8.010.085 520-3006 14148
- 8010085250GH00
Does not work with Yerfdog or Kandi. Be sure to check your hub measurements with the above measurements to be sure you are getting the correct part.
Fits the TrailMaster 150 XRS, 150 XRX and 300 XRX go-karts.
Shipping details:
Do you need your hub fast? If you order before 3:00 pm CST, Monday thru Friday, your order goes out the same day. Buy now!