LH Spindle and Ball Joint Assy for Coleman KT196 and the HiSun HS200GK Go-Karts
LEFT side
This is the spindle and ball joint assembly being used in the current Coleman KT196 go-karts. Ball joints have been pre-installed at the factory for easy installation.
This assembly can be used to upgrade the spindle and ball joints on the older model KT196 karts with some slight modifications. To use this assembly on the older karts, the upper and lower swing arms must be drilled out and enlarged to accommodate the larger ball joints.
The early model KT196s used a ball joint that was 22mm in diameter with an 8mm ball stud. The newer models use a ball joint that is 26mm in diameter with a 10mm stud.
Please see pictures and description below to see if this spindle will work for you.
If using in an older kart, we recommend changing both sides at the same time.
Spindle specs:
- Left
- Includes ball joint
- Round tube length: 154mm (6.07 in)
- Tube OD: 32mm (1.25 in)
- Tube ID: 26mm (1.0 in)
- Length of stud: 63.2mm (2.49 in)
- Stud is threaded M12*1.25 with cotter key hole
- Arm at top is 80mm (3.14 in) long
- Arm has 8.6mm hole at the end
- P400001527110000
- 52711-400001-0000
- 62210-132-0000
Fits all Coleman KT196 and the HiSun HS200GK go-karts.
Shipping details:
Do you need your spindle fast? If you order before 3:00 pm CST, Monday thru Friday, your order goes out the same day. Buy now!