Chinese Fuel Tank for Taotao Lancer 150cc Scooter
This Chinese replacement gas fuel tank for many Chinese mopeds. This tank fits 150cc models.
This tank is identical to our tank #28 except this tank has mounting tabs on the side that have two holes in each, whereas the tank #28 only have the two single tabs. Please look at pictures.
- Overall dimension are approximately: 11" W x 10.5"D x 6.5"H. Does not include spout and nipples. Fuel inlet is about an 1.25" high.
- Opening for fuel level sensor is 28.3mm [1.11"] in diameter
- Single mounting tabs are 219mm [8.65] apart center-to-center
- Two sides have mounting tabs with two holes in each. The holes are 33mm [1.3"] center-to-center apart
- Uses a 36mm push-down-and-twist gas cap
- There is a vent nipple on the same side of the tank as the fuel spout. The nipple can be capped if your unit does not use it.
- Nipple on bottom of tank for fuel outlet
Please note where the nipples are at, particularly the fuel outlet on the bottom of the tank. There are several of these tanks that are identical except for the placement of the fuel outlet and the nipple on the top that is used for overflow/ventilation. The nipple on top can be capped if you don't need it, but the location of where the fuel leaves the tank may be important.
This tank is known to fit the Taotao Lancer scooter. It fits other makes and models too. Please look at the pictures and read the description before ordering.
Need the gas cap?