Gates CVT Drive Belt for Polaris
This CVT drive belt fits Polaris ATVs, & UTVs.
Belt description:
- CVT [-Continuous Variable Transmission-]
- Napa G-Force - 20G4022E
- Polaris ATVs and UTVs
- Replaces Polaris 3211095
- Length: 1051mm [41.375"]
- Width: 31mm [1.2"]
- High Performance Neoprene with Carbon Tensile Cords for Optimal Power Transmission and Increased Side Load Resistance
Fits the following Polaris models:
- 2003 - 2005 Sportsman 500 HO 499cc
Ensure the best performance and longest life from your G-Force belt. Follow these three steps when installing a new belt.
1. Install the Right Belt. Using a belt that’s even slightly different than the OE specs can affect performance – or stop you in your tracks.
2. Align and Clean. Align the clutches according to manufacturer’s specifications and clean the sheaves with a Scotch-Brite® pad. Remove old belt residue, glazing, oils and debris with alcohol or acetone on the clutch sheave area. DO NOT USE BRAKE CLEANER.
3. Install and Break It In. Perform two heat cycles in 20 miles. Conservatively run through the entire shift range, without exceeding ¾ throttle. Bring the belt back to normal operating temperature (15 minutes) then shut down and completely cool the belt for 30 minutes. Repeat the process.